Skip to content

30XV AquaForce® Air-Cooled Liquid Chiller with R-134a Refrigerant

by Carrier
SKU Item 30XV
Request a quote

Air-Cooled Liquid Chiller with R-134a Refrigerant

140 TO 500 NOMINAL TONS

The Carrier® AquaForce® 30XV air-cooled variable-speed screw chiller was developed to ensure the best performance and efficiency in a solution that’s easy to install, easy to service, highly reliable and quiet. The 30XV delivers with industry leading efficiency (IPLV Ratings greater than 21.0 available in certain models) and sound.  The smaller footprint 30XV can replace just about all older equipment going back two generations.  It is designed for tomorrow, and fit for today.  The 30XV can be customized to fit most building needs, anywhere. With value-added features such as fully air-cooled variable frequency drives and next generation sub-systems including rotary screw compressors and quiet AeroAcoustic® fan system, integrated with microchannel condenser coils, the 30XV is made for versatility, robustness and efficiency. Its user-friendly control with color touchscreen display is self-optimizing, enabling the 30XV to run at optimum performance at any given set of conditions.


Air cooled chillers within the scope of the ACCL certification program are certified in accordance with the AHRI Air-Cooled Water-Chilling Packages Certification Program, which is based on AHRI Standard 550/590 (I-P) and AHRI Standard 551/591 (SI). Certified units may be found in the AHRI Directory at www.ahridirectory.org

AeroAcoustic® is a registered trademark of Aeroacoustic Corporation.

PERFORMANCE FEATURES

  • Full-load EER values above 11.0 and IPLV values above 21.0
  • Tiered approach providing from the smallest footprint to the best in class efficiency 
  • ASHRAE 90.1-2013 compliant / AHRI certified
  • Operation from -20 F to 125 F ambient conditions
  • High-efficiency variable speed screw compressors
  • Standard uncoated or optional e-coated Novation® micro channel heat exchanger (MCHX) condenser coils (factory-installed option)
  • Standard 25kA SCCR rating for all voltages (Except 575V, 10kA)

ADDITIONAL IMPORTANT OPTIONS

  • Al/Cu, Cu/Cu Condenser Coils
  • Multiple Sound Configurations 
  • High SCCR factory installed 
  • Variable Speed Condenser Fans 
  • Capacity Recover under 4 mins
  • BACnet Translator (factory-installed option) or BACnet and LON translator control (factory-installed option or field-installed accessory)
  • Optional Energy Management Module minimizes chiller energy consumption (factory-installed option or field-installed accessory)    

RELIABILITY FEATURES

  • ASME constructed evaporators / ETL (and ETL Canada) listed
  • Heavy-gage galvanized steel frame
  • Coil Trim Panels, Security grilles and Full Hail guards/Privacy screen choices (factory-installed option or field-installed accessory)
  • Low ambient head pressure control (factory-installed option or field-installed accessory)
  • Coil corrosion coatings available on all coil types (factory-installed option)

MAINTENANCE FEATURES

  • Over 15 diagnostic functions & trending capability 
  • Permanently lubricated fan motor bearings
  • Compressor suction service valves (factory-installed option)
  • Microchannel condenser coils with inherent corrosion resistance and offering simplified cleaning (factory-installed option)
  • Unit-mounted, non-fused disconnect (factory-installed option)
  • Remote service port for easier machine diagnostics (factory-installed option or field-installed accessory) 

INSTALLATION FEATURES

  • Factory charged with R-134a refrigerant
  • GFI (ground fault interrupter) convenience outlet (factory-installed option or field-installed accessory)
  • Remote evaporator kit (field-installed accessory)
  • Single or dual-point electrical connections available (factory-installed option)
  • Control transformer (factory-installed option)
  • Structurally robust base

STANDARD WARRANTY

  • One year from start-up or 18 months from shipment limited warranty
  • 3-year coil parts warranty on Novation micro channel heat exchanger
  • Extended warranty packages available up to 10 years 

FACTORY-INSTALLED OPTIONS

  • Low-Sound
  • Sound Optimization
  • Condenser Coil Options
  • E-Coated Micro Channel
    • Al/Cu Fins 
    • Pre-coated Al/Cu Fins
    • Cu/Cu Coils
    • E-Coated Al/Cu Coils
    • E-Coated Cu/Cu Coils 
  • Isolation Valve
  • Suction Line Insulation
  • Energy Management Module (EMM) + GFI
  • Chilled Water Temperature Reset (via 4-20 mA Signal; EMM Required)
  • Demand Limit (via 4-20 mA signal, 2 addition steps; EMM Required)
  • Variable Speed Condenser Fans
  • BACnet Translator (MS/TP)
  • LONworks Translator
  • Dual Point Primary Power Entry 
  • Control Transformer
  • Unit Mounted Main Disconnect, Non-fused
  • High SCCR
  • Condenser Coil Trim Panels
  • Security Grilles
  • Hail Guards
  • Full Hail Guards
  • Skid & Bag

FIELD-INSTALLED ACCESSORY KITS

  • Energy Management Module (EMM) & GFI
  • Chilled Water Temperature Reset (via 4-20 mA signal; EMM Required)
  • Demand Limit
  • LONworks Translator
  • Dual Chiller Accessory Kit 
  • Condenser Coil Trim Panels
  • Security Grilles
  • Full Hail Guard

-We have a 30-day return policy, which means you have 30 days after receiving your item to request a return.

-Please note: After 30-Days a Restocking Fee will be applied to all returns after 30-Days.
-To be eligible for a return, your item must be in the same condition that you received it, unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
-To start a return, you can contact us at sabersales@sbcglobal.net or come in-store. 
Items sent back to us without first requesting a return will not be accepted.

-Unfortunately, WE CANNOT accept returns on Clearance, Sales Items & Gift Cards

Damages and issues
Please inspect your order upon reception and contact us immediately if the item is defective, damaged or if you receive the wrong item, so that we can evaluate the issue and make it right.

Exceptions / non-returnable items
Certain types of items cannot be returned, like perishable goods (such as food, flowers, or plants). We also do not accept returns for hazardous materials, flammable liquids, or gases. Please get in touch if you have questions or concerns about your specific item.

All orders take about 2-24 business hours to process and ship out. All packages will ship Monday-Friday.

Your order will be packaged with care and discretion. Items are securely wrapped to prevent shifting while in transit.

When your order is shipped, you will receive an email notification which includes a tracking number. You can also track your order through your profile page here.

Orders Over A Certain Weight Are Subject To Pallet Deliveries Which Could Be Subject To Higher Shipping Costs, However Shipping Speeds Remain The Same 1-4 Days, Depending On Location.

Please note: Tracking numbers often take up to 24 hours to be recognized by carriers. If you attempt to track your order and the tracking number returns a non-trackable message, please try again later as your tracking number may not have yet been fully recognized by your carrier. 

Compare products

{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}

Select first item to compare

Select second item to compare

Select third item to compare

Compare